1998 328is power locks not working
so i checked the trunk n floor wires n theres no fraying.
i replaced the zke (gm iv) module with a tested working one and nothing
I'm getting stumped the passenger door still only locks from the outside and double locks. as for the driver side it doesn't double lock and can be locked from both inside and outside.
also if i short out the alarm using a jumper between + 12v and lock i can get the windows to go up but the doors don't lock. and if i short +12v with unlock i can use the buttons on the centre console to roll the windows up and down but still nothing with the locks...
another point is i took out the centre console button shorted the red/grn/yellow wire with the red/grn wire n still nothing i can't find my dmm at the moment so i can't test it properly but i doubt its gonna be the button.