Thread: Miami Weiss
View Single Post
Old 03-11-2012, 11:24 AM   #10
Bullet Ride
Cars in Perpetual Repair
 
Bullet Ride's Avatar
 
Join Date: Nov 2007
Location: Guelph
Posts: 5,749
Quote:
Originally Posted by defaultName View Post
Front suspension progress is on hold due to Scott slicing open his hand while making a sandwich
This is one of the best project status updates I've seen recently
I'm only laughing at it because Scott seems to be ok and can still type.

Quote:
Originally Posted by E30M42cab View Post
Bloody inner ball joint. Almost as hard to get off as the front wheels!! No Joke.
You guys are having problems with the tie rod and inner ball joint? C'Mon...
Inner ball joint is easy, your run of the mill $20 pickle fork should wedge nicely between the control arm and the front subframe right near the inner ball joint... smash it with a BFH until it pops.
For the tie rod
-turn the wheel so the desired ball joint is facing out
-support strut assembly with a jack
-if you're trying to save the ball joint screw the nut onto the ball joint stud
-get something solid such as an old, long 1/2" extension
-place on top of ball joint stud
-abuse repeatedly with BFH until it pops.
-alternatively you can also beat against the control arm, but the farther you hit from the ball joint the longer it will take to get it to pop
__________________
Bullet Ride is offline   Reply With Quote